Gain the knowledge needed to install, configure, operate, and troubleshoot an enterprise network and explore advanced routing and infrastructure technologies. Learners taking the Cisco CCNP Enterprise: Advanced Routing course will be prepared for the Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) concentration exam to earn the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification.
The labs are supported in NETLAB+ using the Professional Multi-purpose Academy Pod (PMAP)
| Lab | Title |
|---|---|
| 1.1.2 | Troubleshoot IPv4 and IPv6 Addressing Issues |
| 1.1.3 | Troubleshoot IPv4 and IPv6 Static Routing |
| 2.1.2 | Implement EIGRP for IPv4 |
| 3.1.2 | Implement Advanced EIGRP for IPv4 Features |
| 4.1.2 | Troubleshoot EIGRP for IPv4 |
| 5.1.2 | Implement EIGRP for IPv6 |
| 5.1.3 | Troubleshoot EIGRP for IPv6 |
| 6.1.2 | Implement Single-Area OSPFv2 |
| 7.1.2 | Implement Multi-Area OSPFv2 |
| 7.1.3 | OSPFv2 Route Summarization and Filtering |
| 8.1.2 | Troubleshoot OSPFv2 |
| 9.1.2 | Implement Multiarea OSPFv3 |
| 10.1.2 | Troubleshoot OSPFv3 |
| 11.1.2 | Implement eBGP for IPv4 |
| 11.1.3 | Implement MP-BGP |
| 12.1.2 | Implement BGP Path Manipulation |
| 13.1.2 | Implement BGP Communities |
| 14.1.2 | Troubleshooting BGP |
| 15.1.2 | Control Routing Updates |
| 15.1.3 | Path Control Using PBR |
| 15.1.4 | Troubleshoot Route Maps and PBR |
| 16.1.2 | Configure Route Redistribution Between EIGRP and OSPF |
| 16.1.3 | Configure Route Redistribution Within the Same Interior Gateway Protocol |
| 16.1.4 | Configure Route Redistribution Using BGP |
| 17.1.2 | Troubleshoot Redistribution TT1 |
| 17.1.2 | Troubleshoot Redistribution TT2-TT3 |
| 19.1.2 | Implement a GRE Tunnel |
| 21.1.2 | Troubleshoot IPv4 ACLs |
| 21.1.3 | Troubleshoot IPv6 ACLs |
| 21.1.4 | Troubleshoot Prefix Lists |
| 22.1.2 | Troubleshoot IOS AAA |
| 22.1.3 | Troubleshoot uRPF |
| 23.1.2 | Troubleshoot Device Access and File Transfer |
| 23.1.3 | Troubleshoot SNMP and Logging Issues |
| 23.1.4 | Troubleshoot IP SLA and Netflow |
| ENARSI SA | Configuration |
| ENARSI SA | Troubleshooting |
To enable the CCNP Enterprise: Advanced Routing and Services (ENARSI) v8 labs, install the CCNP Enterprise: Advanced Routing and Services (ENARSI) v8.0 course using the Course Manager. See the Course Manager section of the NETLAB+ VE Admin Guide for details. The course content will then be available to be added to classes.
Always select the correct lab exercise for the lab being performed. Students or teams should schedule the correct lab exercise from the catalog. NETLAB+ will only show those labs for which the required pod type is available. A lab that works on different pod types may appear more than once if your system is so equipped. Instructors should select the correct lab from the Exercise tab during instructor-led lab reservations. This can be done as many times as needed during the reservation.
Importance of Choosing the Correct Lab Exercise
Several of the labs may differ from the standard pod topologies. This is
handled by NETLAB+ Dynamic VLAN Mapping technology. Always select the
correct lab exercise for the actual lab. This ensures that NETLAB+
will set up VLANs on the control switch such that lab devices and PCs are
placed in the correct LAN segment for the exercise being performed. Selecting
the correct exercise will also make the completed lab output easier to find in
the archive.
NETLAB+ will configure the routers with initial configuration files that include basic IP connectivity. Please verify this configuration by pinging the network interfaces before starting the lab exercise.
