|Lab Number||Title||Pod Required|
|18.104.22.168||Configuring Basic Switch Settings||MAP or MAP w/ASA|
|22.214.171.124||Configuring Switch Security Features||MAP or MAP w/ASA|
|126.96.36.199||Configuring VLANs and Trunking||MAP or MAP w/ASA|
|188.8.131.52||Troubleshooting VLAN Configurations||MAP or MAP w/ASA|
|184.108.40.206||Implementing VLAN Security||MAP or MAP w/ASA|
|220.127.116.11||Building a Switched Network with Redundant Links||MAP or MAP w/ASA|
|18.104.22.168||Configuring Rapid PVST+, PortFast, and BPDU Guard||MAP or MAP w/ASA|
|22.214.171.124||Configuring HSRP and GLBP||MAP or MAP w/ASA|
|126.96.36.199||Configuring EtherChannel||MAP or MAP w/ASA|
|188.8.131.52||Troubleshooting EtherChannel||MAP or MAP w/ASA|
|184.108.40.206||Configuring Per-Interface Inter-VLAN Routing||MAP or MAP w/ASA|
|220.127.116.11||Configuring 802.1Q Trunk-Based Inter-VLAN Routing||MAP or MAP w/ASA|
|18.104.22.168||Troubleshooting Inter-VLAN Routing||MAP or MAP w/ASA|
|22.214.171.124||Configuring Basic DHCPv4 on a Router||MAP or MAP w/ASA|
|126.96.36.199||Configuring Basic DHCPv4 on a Switch||MAP or MAP w/ASA|
|188.8.131.52||Troubleshooting DHCPv4||MAP or MAP w/ASA|
|184.108.40.206||Configuring Stateless and Stateful DHCPv6||MAP or MAP w/ASA|
|220.127.116.11||Troubleshooting DHCPv6||MAP or MAP w/ASA|
To enable the CCNA Routing and Switching - Switched Networks labs, create a class and check the appropriate global labs in the class settings as described in the table below, depending on the pod(s) that will be used.
|Multi-purpose Academy Pod||AE CCNARS SWITCHNET - MAP - English||On the Global Labs section of the class settings, check the "AE CCNARS SWITCHNET - MAP - English" if the MAP will be used to perform the labs.|
|Multi-purpose Academy Pod w/ASA||AE CCNARS SWITCHNET - MAPASA - English||On the Global Labs section of the class settings, check the "AE CCNARS SWITCHNET - MAPASA - English" if the MAP w/ASA will be used to perform the labs.|
The Multi-purpose Academy Pod (MAP) is also available for "pod-only" reservations. To enable pod-only reservations, select the check box for "Multi-purpose Academy Pod (no labs)" in the class settings.
The Multi-purpose Academy Pod with ASA (MAP w/ASA) is also available for "pod-only" reservations. To enable pod-only reservations, select the check box for "AE MAP w/ ASA (no labs)" in the class settings.
"Pod-only" reservations are not tied to specific lab exercises. Therefore, the pod will be configured using the default network configuration and will not be properly configured to complete CCNA Routing and Switching - Switched Networks labs.
Always select the correct lab exercise for the lab being performed. Students or teams should schedule the correct lab exercise from the catalog. NETLAB+ will only show those labs for which the required pod type is available. A lab that works on different pod types may appear more than once if your system is so equipped. Instructors should select the correct lab from the Exercise tab during instructor-led lab reservations. This can be done as many times as needed during the reservation.
Importance of Choosing the Correct Lab Exercise
Several of the labs may differ from the standard pod topologies. This is handled by NETLAB+ Dynamic VLAN Mapping technology. Always select the correct lab exercise for the actual lab. This insures that NETLAB+ will set up VLANs on the control switch such that lab devices and PCs are placed in the correct LAN segment for the exercise being performed. Selecting the correct exercise will also make the completed lab output easier to find in the archive.