|Lab Number||Title||Pod Required|
|0.0.0.1||Initializing and Reloading a Router and Switch||MAP or MAP w/ASA|
|0.0.0.2||Installing the IPv6 Protocol with Windows XP||MAP or MAP w/ASA|
|220.127.116.11||Configuring Basic Router Settings with IOS CLI||MAP or MAP w/ASA|
|18.104.22.168||Configuring Basic Router Settings with CCP||MAP or MAP w/ASA|
|22.214.171.124||Configuring IPv4 Static and Default Routes||MAP or MAP w/ASA|
|126.96.36.199||Configuring IPv6 Static and Default Routes||MAP or MAP w/ASA|
|188.8.131.52||Designing and Implementing IPv4 Addressing with VLSM||MAP or MAP w/ASA|
|184.108.40.206||Troubleshooting IPv4 and IPv6 Static Routes||MAP or MAP w/ASA|
|220.127.116.11||Configuring Basic RIPv2 and RIPng||MAP or MAP w/ASA|
|18.104.22.168||Configuring Basic EIGRP for IPv4||MAP or MAP w/ASA|
|22.214.171.124||Configuring Basic EIGRP for IPv6||MAP or MAP w/ASA|
|126.96.36.199||Configuring Advanced EIGRP for IPv4 Features||MAP or MAP w/ASA|
|188.8.131.52||Troubleshooting Basic EIGRP for IPv4 and IPv6||MAP or MAP w/ASA|
|184.108.40.206||Troubleshooting Advanced EIGRP||MAP or MAP w/ASA|
|220.127.116.11||Configuring Basic Single-Area OSPFv2||MAP or MAP w/ASA|
|18.104.22.168||Configuring Basic Single-Area OSPFv3||MAP or MAP w/ASA|
|22.214.171.124||Configuring OSPFv2 on a Multiaccess Network||MAP or MAP w/ASA|
|126.96.36.199||Configuring OSPFv2 Advanced Features||MAP or MAP w/ASA|
|188.8.131.52||Troubleshooting Basic Single-Area OSPFv2 and OSPFv3||MAP or MAP w/ASA|
|184.108.40.206||Troubleshooting Advanced Single-Area OSPFv2||MAP or MAP w/ASA|
|220.127.116.11||Configuring Multiarea OSPFv2||MAP or MAP w/ASA|
|18.104.22.168||Configuring Multiarea OSPFv3||MAP or MAP w/ASA|
|22.214.171.124||Troubleshooting Multiarea OSPFv2 and OSPFv3||MAP or MAP w/ASA|
|126.96.36.199||Configuring and Verifying Standard ACLs||MAP or MAP w/ASA|
|188.8.131.52||Configuring and Verifying VTY Restrictions||MAP or MAP w/ASA|
|184.108.40.206||Configuring and Verifying Extended ACLs||MAP or MAP w/ASA|
|220.127.116.11||Troubleshooting ACL Configuration and Placement||MAP or MAP w/ASA|
|18.104.22.168||Configuring and Verifying IPv6 ACLs||MAP or MAP w/ASA|
To enable the CCNA Routing and Switching - Routing Protocols labs, create a class and check the appropriate global labs in the class settings as described in the table below, depending on the pod(s) that will be used.
|Multi-purpose Academy Pod||AE CCNARS ROUTPROT - MAP - English||On the Global Labs section of the class settings, check the "AE CCNARS ROUTPROT - MAP - English" if the MAP will be used to perform the labs.|
|Multi-purpose Academy Pod w/ASA||AE CCNARS ROUTPROT - MAPASA - English||On the Global Labs section of the class settings, check the "AE CCNARS ROUTPROT - MAPASA - English" if the MAP w/ASA will be used to perform the labs.|
The Multi-purpose Academy Pod (MAP) is also available for "pod-only" reservations. To enable pod-only reservations, select the check box for "Multi-purpose Academy Pod (no labs)" in the class settings.
The Multi-purpose Academy Pod with ASA (MAP w/ASA) is also available for "pod-only" reservations. To enable pod-only reservations, select the check box for "AE MAP w/ ASA (no labs)" in the class settings.
"Pod-only" reservations are not tied to specific lab exercises. Therefore, the pod will be configured using the default network configuration and will not be properly configured to complete CCNA Routing and Switching - Routing Protocols labs.
Always select the correct lab exercise for the lab being performed. Students or teams should schedule the correct lab exercise from the catalog. NETLAB+ will only show those labs for which the required pod type is available. A lab that works on different pod types may appear more than once if your system is so equipped. Instructors should select the correct lab from the Exercise tab during instructor-led lab reservations. This can be done as many times as needed during the reservation.
Importance of Choosing the Correct Lab Exercise
Several of the labs may differ from the standard pod topologies. This is handled by NETLAB+ Dynamic VLAN Mapping technology. Always select the correct lab exercise for the actual lab. This insures that NETLAB+ will set up VLANs on the control switch such that lab devices and PCs are placed in the correct LAN segment for the exercise being performed. Selecting the correct exercise will also make the completed lab output easier to find in the archive.